0.9mm PVC Tarpaulin Inflatable Water Parks Durable Floating Water
Games Equipments
Specification :
| Product Type | Inflatable water park |
| Material | Plato 0.9mm PVC Tarpaulin |
| Size | 20x20m |
| Color | Yellow , red and blue |
| Warranty | 2 years |
| Air pump | CE: 220V-240V UL:110V-115V |
| MOQ | 1 set |
| Shipping | By sea or by air |
Details :
| Single product name | Quantities | Size |
| Hurdle | 1 | 5.5x2 m |
| Climb | 1 | 4.7x2 m |
| Junction | 2 | 3.5x3.5 m |
| Beam | 1 | 4.5x2 m |
| Base | 1 | 3x2 m |
| Tunnel | 1 | 5x2 m |
| Trampoline | 1 | 4.5x4.5 m |
| Bed | 1 | 6.5x3 m |
| Deck | 1 | 3.5x3.5 m |
| Curve | 1 | 3.7x3.7 m |
| Butterfly | 1 | 5x2 m |
| Slide | 1 | 2.7x2 m |
| Fence | 1 | 4.2x4.2 m |
| Cliff | 1 | 3.5x2 m |
| Swing | 1 | 6x2 m |
| Slide 1 | 1 | 3x2 m |
Descriptions:
1. 0.9mm PVC Tarpaulin :
Its thickness has 0.4mm , 0.45mm , 0.55mm . 0.6mm and 0.9mm , this
set of water park is airtight system , we usually use 0.9mm in
thickness , best quality. PVC Tarpaulin itself contains 3 layers , double sides coated with
a strong net inside , it is so strong that you can't tear it off .
2. 20x20m inflatable water park : It contains 18 pieces in total. We
send you 4 air pumps for free .
3. System : This Inflatable Water Park is airtight system , it means
that it only needs to be inflated one time with air pump connecting
electricity .
4. Warranty : This inflatable water park will be guaranteed for 2
years , in this warranty period , If there are any quality problems
, we would take full responsibility for getting it re-worked , if
failed , we promise to make a new one for you .
5. All our products are OEM . Different model , size , color , logo
can be customized .
Applications :
This set of water park can be placed in the sea, lake or pool and
can hold about 60 people . Its size and color can be changed based
on original design . Even you can design the model as your ideas .
Advantages :
1. All our materials are purchased from Plato factory , Wibit special
material -- Wibit 0.9mm PVC Tarpaulin , more expensive than general
0.9mm PVC Tarpaulin . We can send you some materials for your
testing .
2. Welded strongly with high temperature machine and exprienced
workers . Besides , reinforced a extra strip on all seams ,
stronger and more durable .
3. Installing reducing pressure valve . When the airpressure is
exceed when temperature is upto a high degree, this reducing
presure valve will make the product deflated automatically , in
case of the product would blast because of the exceed pressure .
4. Strong D rings and handles , it is very difficult to tear them off
.
Maintanace menthod and the attentions:
1. if the product appear small damage , under 5 cm, can be repaired
by glue.
2. if the damage area is larger , please select a needle to
thread-stitching , then repaired by glue ; or select professional
factory for maintenance.
3. clean the damage with clear water , dry with clear dishcloth ,
blow to dry completely.
4. use the material of the same color to repair , cutting a patches
, the area size need larger than the damage area.
5. cover the damage by patches , and mark surrounding the patches.
6. glue on the patches coated with a thin layer , note is not glue
as thick as possible.
7. toated with a thin layer of glue inside the loop , be carefully
not to gule out the loop .
8. aftert a few minutes , aligning patches with the damage ,
stablish .
9. in the process of paste , slightly with blower , heating , make
pasting more firmly .
10. if bubbles appeared in the process of pasting , can use hair
dryer heating , meanwhile , use flat thing to move out the gas.
Pictures :
